Engineering Plastics Market Report

 

The taillights of cars are becoming increasingly spectacular; the former radiator front can also be redesigned with electrification. The new vehicle design is often made possible by PMMA, better known under brand names such as Plexiglas or Acrylite. Although engineering plastics are more expensive than standard plastics, they are characterized by special physical and chemical properties. These high-performance, lightweight materials can be continuously used at temperatures up to about 150°C. They are increasingly replacing metal, glass or ceramics, for example in applications such as plain bearings, gears, seals, insulators and housings. This is the fourth time that Ceresana has analyzed the global market for engineering plastics: Last year, 22.4 million tonnes of ABS, PC, PA, PMMA, POM, PBT, SAN and fluoropolymers were consumed.

Automotive Industry: A Growing Application Area

The two most important sales markets for engineering plastics are currently the electrical and electronics industry and consumer products. However, the market researchers at Ceresana forecast that the third largest area of application to achieve the highest growth in the next few years will be the automotive industry. In contrast, applications in the construction industry will develop at a somewhat slower pace, with expected growth rates of 2.2% per year. There are major differences between the various types of engineering plastics in this respect.

ABS Dominates the Market for Engineering Plastics

Ceresana's latest study provides demand, revenue, production and trade figures for the overall engineering plastics market, as well as demand for each of the different types of plastics and their applications. The best-selling engineering plastic is currently acrylonitrile butadiene styrene: ABS accounts for around 41% of global demand. ABS is used primarily in the automotive sector, for electrics and electronics, and in smaller quantities in the construction industry and in the household and consumer goods sector. Typical products made of ABS are door panels for cars, housings for electrical appliances, films, pipes and covers, but also shower heads, as well as numerous toys, sports and leisure products.

The Study in Brief

Chapter 1 provides a depiction and analysis of the global market for engineering plastics - including forecasts up to 2030: for each region of the world, demand and production in tonnes and revenues in USD and EUR are explained. In addition, global and regional demand per type of plastic, per application area and the demand for individual products per application are analyzed.

The following products are considered in detail:

  • Acrylonitrile butadiene styrene (ABS)
  • Polycarbonate (PC)
  • Polyamides (PA)
  • Polymethyl methacrylate (PMMA)
  • Polyoxymethylene (POM)
  • Polybutylene terephthalate (PBT)
  • Styrene acrylonitrile (SAN)
  • Fluoropolymers

Application areas examined in this study are:

  • Transportation
  • Electrical and Electronics (E&E)
  • Consumer Goods
  • Construction
  • Others

In Chapter 2, 25 countries are considered individually. The following is depicted by countries:

  • demand
  • revenue
  • production
  • trade
  • demand per product
  • demand per application for these countries: Belgium, Germany, France, the United Kingdom, Italy, the Netherlands, Spain, Poland, Russia, Turkey, Canada, Mexico, the USA, Brazil, China, India, Japan, South Korea and Taiwan.

Chapter 3 provides useful company profiles of the most important manufacturers of engineering plastics, clearly arranged according to contact details, revenues, profit, product range, production sites, capacities and profile summary. Extensive profiles of 117 manufacturers of engineering plastics are provided, e.g. 3M, BASF, Braskem, ChemChina, Covestro, DuPont, LG Chem, LyondellBasell, SABIC, Sinopec, Solvay, Teijin, and Total.

1 Market Data: World and Regions

1.1 World
1.1.1 Demand
1.1.2 Revenues
1.1.3 Production

1.1.4 Applications
1.1.4.1 Transportation
1.1.4.2 Electrical and Electronics
1.1.4.3 Consumer Goods
1.1.4.4 Construction
1.1.4.5 Other Applications

1.1.5 Products
1.1.5.1 Acrylonitrile Butadiene Styrene (ABS)
1.1.5.2 Polycarbonate (PC)
1.1.5.3 Polyamide (PA)
1.1.5.4 Polymethylmethacrylate (PMMA)
1.1.5.5 Polyoxymethylene (POM)
1.1.5.6 Polybutylene Terephthalate (PBT)
1.1.5.7 Styrene Acrylonitrile (SAN)
1.1.5.8 Fluoropolymers

1.2 Western Europe
1.2.1 Demand
1.2.2 Revenues
1.2.3 Production
1.2.4 Applications and Products

1.3 Eastern Europe
1.3.1 Demand
1.3.2 Revenues
1.3.3 Production
1.3.4 Applications and Products

1.4 North America
1.4.1 Demand
1.4.2 Revenues
1.4.3 Production
1.4.4 Applications and Products

1.5 South America
1.5.1 Demand
1.5.2 Revenues
1.5.3 Production
1.5.4 Applications and Products

1.6 Asia-Pacific
1.6.1 Demand
1.6.2 Revenues
1.6.3 Production
1.6.4 Applications and Products

1.7 Middle East / Africa
1.7.1 Demand
1.7.2 Revenues
1.7.3 Production
1.7.4 Applications and Products

2 Market Data: Countries

2.1 Western Europe
2.1.1 Austria
2.1.2 Belgium
2.1.2.1 Demand and Revenues
2.1.2.2 Production and Trade
2.1.3 France
2.1.3.1 Demand and Revenues
2.1.3.2 Production and Trade
2.1.4 Germany
2.1.4.1 Demand and Revenues
2.1.4.2 Production and Trade
2.1.5 Italy
2.1.5.1 Demand and Revenues
2.1.5.2 Production and Trade
2.1.6 Spain
2.1.6.1 Demand and Revenues
2.1.6.2 Production and Trade
2.1.7 The Netherlands
2.1.7.1 Demand and Revenues
2.1.7.2 Production and Trade
2.1.8 United Kingdom
2.1.9 Other Western Europe
2.1.9.1 Demand and Revenues
2.1.9.2 Production and Trade

2.2 Eastern Europe
2.2.1 Czechia
2.2.2 Poland
2.2.2.1 Demand and Revenues
2.2.2.2 Production and Trade
2.2.3 Russia
2.2.3.1 Demand and Revenues
2.2.3.2 Production and Trade
2.2.4 Turkey
2.2.5 Other Eastern Europe
2.2.5.1 Demand and Revenues
2.2.5.2 Production and Trade

2.3 North America
2.3.1 Canada
2.3.1.1 Demand and Revenues
2.3.1.2 Production and Trade
2.3.2 Mexico
2.3.2.1 Demand and Revenues
2.3.2.2 Production and Trade
2.3.3 USA
2.3.3.1 Demand and Revenues
2.3.3.2 Production and Trade

2.4 South America
2.4.1 Brazil
2.4.1.1 Demand and Revenues
2.4.1.2 Production and Trade
2.4.2 Other South America

2.5 Asia-Pacific
2.5.1 China
2.5.1.1 Demand and Revenues
2.5.1.2 Production and Trade
2.5.2 India
2.5.2.1 Demand and Revenues
2.5.2.2 Production and Trade
2.5.3 Indonesia
2.5.3.1 Demand and Revenues
2.5.3.2 Production and Trade
2.5.4 Japan
2.5.4.1 Demand and Revenues
2.5.4.2 Production and Trade
2.5.5 Malaysia
2.5.5.1 Demand and Revenues
2.5.5.2 Production and Trade
2.5.6 South Korea
2.5.6.1 Demand and Revenues
2.5.6.2 Production and Trade
2.5.7 Taiwan
2.5.7.1 Demand and Revenues
2.5.7.2 Production and Trade
2.5.8 Thailand
2.5.8.1 Demand and Revenues
2.5.8.2 Production and Trade
2.5.9 Vietnam
2.5.9.1 Demand and Revenues
2.5.9.2 Production and Trade
2.5.10 Other Asia-Pacific
2.5.10.1 Demand and Revenues
2.5.10.2 Production and Trade

3 Company Profiles*

3.1 Western Europe
Belgium (1 Producer)
France (1)
Germany (10)
Italy (2)
Spain (1)
Switzerland (1)
The Netherlands (2)

3.2 Eastern Europe
Belarus (1)
Poland (1)
Russia (6)
Slovakia (1)

3.3 North America
USA (10)

3.4 South America
Brazil (1)

3.5 Asia-Pacific
China (35)
India (4)
Japan (14)
South Korea (6)
Taiwan (9)
Thailand (4)

3.6 Middle East
Iran (3)
Saudi Arabia (4)

*The profiles are assigned to the country in which the company or holding is headquartered. Profiles also include JVs and subsidiaries.

Graph 1: Global demand for engineering plastics from 2018 to 2030
Graph 2: Global demand for engineering plastics from 2018 to 2030 – split by regions
Graph 3: Global revenues generated with engineering plastics from 2018 to 2030 in billion USD and billion EUR
Graph 4: Global revenues generated with engineering plastics from 2018 to 2030 in billion USD – split by regions
Graph 5: Global revenues generated with engineering plastics from 2018 to 2030 in billion EUR – split by regions
Graph 6: Global production of engineering plastics from 2018 to 2030
Graph 7: Global production of engineering plastics from 2018 to 2030 – split by regions
Graph 8: Global demand for engineering plastics from 2018 to 2030 – split by applications
Graph 9: Global demand for engineering plastics in the segment transportation from 2018 to 2030 – split by regions
Graph 10: Global demand for engineering plastics in the segment electrical and electronics from 2018 to 2030 – split by regions
Graph 11: Global demand for engineering plastics in the segment consumer goods from 2018 to 2030 – split by regions
Graph 12: Global demand for engineering plastics in the construction industry from 2018 to 2030 – split by regions
Graph 13: Global demand for engineering plastics in other applications from 2018 to 2030 – split by regions
Graph 14: Global demand for ABS from 2018 to 2030 – split by regions
Graph 15: Global demand for PC from 2018 to 2030 – split by regions
Graph 16: Global demand for PA from 2018 to 2030 – split by regions
Graph 17: Global demand for PMMA from 2018 to 2030 – split by regions
Graph 18: Global demand for POM from 2018 to 2030 – split by regions
Graph 19: Global demand for PBT from 2018 to 2030 – split by regions
Graph 20: Global demand for SAN from 2018 to 2030 – split by regions
Graph 21: Global demand for fluoropolymers from 2018 to 2030 – split by regions
Graph 22: Demand for engineering plastics in Western Europe from 2018 to 2030
Graph 23: Revenues generated with engineering plastics in Western Europe from 2018 to 2030, in billion USD and billion EUR
Graph 24: Production of engineering plastics in Western Europe from 2018 to 2030
Graph 25: Demand for engineering plastics in Western Europe from 2018 to 2030 – split by applications
Graph 26: Demand for engineering plastics in Eastern Europe from 2018 to 2030
Graph 27: Revenues generated with engineering plastics in Eastern Europe from 2018 to 2030, in billion USD and billion EUR
Graph 28: Production of engineering plastics in Eastern Europe from 2018 to 2030
Graph 29: Demand for engineering plastics in Eastern Europe from 2018 to 2030 – split by applications
Graph 30: Demand for engineering plastics in North America from 2018 to 2030
Graph 31: Revenues generated with engineering plastics in North America from 2018 to 2030, in billion USD and billion EUR
Graph 32: Production of engineering plastics in North America from 2018 to 2030
Graph 33: Demand for engineering plastics in North America from 2018 to 2030 – split by applications
Graph 34: Demand for engineering plastics in South America from 2018 to 2030
Graph 35: Revenues generated with engineering plastics in South America from 2018 to 2030, in billion USD and billion EUR
Graph 36: Production of engineering plastics in South America from 2018 to 2030
Graph 37: Demand for engineering plastics in South America from 2018 to 2030 – split by applications
Graph 38: Demand for engineering plastics in Asia-Pacific from 2018 to 2030
Graph 39: Revenues generated with engineering plastics in Asia-Pacific from 2018 to 2030, in billion USD and billion EUR
Graph 40: Production of engineering plastics in Asia-Pacific from 2018 to 2030
Graph 41: Demand for engineering plastics in Asia-Pacific from 2018 to 2030 – split by applications
Graph 42: Demand for engineering plastics in the Middle East and Africa from 2018 to 2030
Graph 43: Revenues generated with engineering plastics in the Middle East and Africa from 2018 to 2030 in billion USD and billion EUR
Graph 44: Production for engineering plastics in the Middle East and Africa from 2018 to 2030
Graph 45: Demand for engineering plastics in the Middle East and Africa from 2018 to 2030 – split by applications
Graph 46: Demand for engineering plastics in Austria from 2018 to 2030
Graph 47: Demand for engineering plastics in Belgium from 2018 to 2030
Graph 48: Production of engineering plastics in Belgium from 2018 to 2030
Graph 49: Demand for engineering plastics in France from 2018 to 2030
Graph 50: Production of engineering plastics in France from 2018 to 2030
Graph 51: Demand for engineering plastics in Germany from 2018 to 2030
Graph 52: Production of engineering plastics in Germany from 2018 to 2030
Graph 53: Demand for engineering plastics in Italy from 2018 to 2030
Graph 54: Production of engineering plastics in Italy from 2018 to 2030
Graph 55: Demand for engineering plastics in Spain from 2018 to 2030
Graph 56: Production of engineering plastics in Spain from 2018 to 2030
Graph 57: Demand for engineering plastics in the Netherlands from 2018 to 2030
Graph 58: Production of engineering plastics in the Netherlands from 2018 to 2030
Graph 59: Demand for engineering plastics in the United Kingdom from 2018 to 2030
Graph 60: Demand for engineering plastics in Other Western Europe from 2018 to 2030
Graph 61: Production of engineering plastics in Other Western Europe from 2018 to 2030
Graph 62: Demand for engineering plastics in Czechia from 2018 to 2030
Graph 63: Demand for engineering plastics in Poland from 2018 to 2030
Graph 64: Production of engineering plastics in Poland from 2018 to 2030
Graph 65: Demand for engineering plastics in Russia from 2018 to 2030
Graph 66: Production of engineering plastics in Russia from 2018 to 2030
Graph 67: Demand for engineering plastics in Turkey from 2018 to 2030
Graph 68: Demand for engineering plastics in Other Eastern Europe from 2018 to 2030
Graph 69: Production of engineering plastics in Other Eastern Europe from 2018 to 2030
Graph 70: Demand for engineering plastics in Canada from 2018 to 2030
Graph 71: Production of engineering plastics in Canada from 2018 to 2030
Graph 72: Demand for engineering plastics in Mexico from 2018 to 2030
Graph 73: Production of engineering plastics in Mexico from 2018 to 2030
Graph 74: Demand for engineering plastics in the USA from 2018 to 2030
Graph 75: Production of engineering plastics in the USA from 2018 to 2030
Graph 76: Demand for engineering plastics in Brazil from 2018 to 2030
Graph 77: Production of engineering plastics in Brazil from 2018 to 2030
Graph 78: Demand for engineering plastics in Other South America from 2018 to 2030
Graph 79: Demand for engineering plastics in China from 2018 to 2030
Graph 80: Production of engineering plastics in China from 2018 to 2030
Graph 81: Demand for engineering plastics in India from 2018 to 2030
Graph 82: Production of engineering plastics in India from 2018 to 2030
Graph 83: Demand for engineering plastics in Indonesia from 2018 to 2030
Graph 84: Production of engineering plastics in Indonesia from 2018 to 2030
Graph 85: Demand for engineering plastics in Japan from 2018 to 2030
Graph 86: Production of engineering plastics in Japan from 2018 to 2030
Graph 87: Demand for engineering plastics in Malaysia from 2018 to 2030
Graph 88: Production of engineering plastics in Malaysia from 2018 to 2030
Graph 89: Demand for engineering plastics in South Korea from 2018 to 2030
Graph 90: Production of engineering plastics in South Korea from 2018 to 2030
Graph 91: Demand for engineering plastics in Taiwan from 2018 to 2030
Graph 92: Production of engineering plastics in Taiwan from 2018 to 2030
Graph 93: Demand for engineering plastics in Thailand from 2018 to 2030
Graph 94: Production of engineering plastics in Thailand from 2018 to 2030
Graph 95: Demand for engineering plastics in Vietnam from 2018 to 2030
Graph 96: Production of engineering plastics in Vietnam from 2018 to 2030
Graph 97: Demand for engineering plastics in Other Asia-Pacific from 2018 to 2030
Graph 98: Production of engineering plastics in Other Asia-Pacific from 2018 to 2030

Table 1: Global demand for engineering plastics from 2018 to 2030 – split by regions
Table 2: Global revenues generated with engineering plastics from 2018 to 2030 in billion USD – split by regions
Table 3: Global revenues generated with engineering plastics from 2018 to 2030 in billion EUR – split by regions
Table 4: Global production of engineering plastics from 2018 to 2030 – split by regions
Table 5: Global demand for engineering plastics from 2018 to 2030 – split by applications
Table 6: Global demand for engineering plastics in the segment transportation from 2018 to 2030 – split by regions
Table 7: Global demand for engineering plastics in the segment electrical and electronics from 2018 to 2030 – split by regions
Table 8: Global demand for engineering plastics in the segment consumer goods from 2018 to 2030 – split by regions
Table 9: Global demand for engineering plastics in the construction industry from 2018 to 2030 – split by regions
Table 10: Global demand for engineering plastics in other applications from 2018 to 2030 – split by regions
Table 11: Global demand for engineering plastics from 2018 to 2030 – split by products
Table 12: Global demand for ABS from 2018 to 2030 – split by regions
Table 13: Global demand for ABS from 2018 to 2030 – split by applications
Table 14: Global demand for PC from 2018 to 2030 – split by regions
Table 15: Global demand for PC from 2018 to 2030 – split by applications
Table 16: Global demand for PA from 2018 to 2030 – split by regions
Table 17: Global demand for PA from 2018 to 2030 – split by applications
Table 18: Global demand for PMMA from 2018 to 2030 – split by regions
Table 19: Global demand for PMMA from 2018 to 2030 – split by applications
Table 20: Global demand for POM from 2018 to 2030 – split by regions
Table 21: Global demand for POM from 2018 to 2030 – split by applications
Table 22: Global demand for PBT from 2018 to 2030 – split by regions
Table 23: Global demand for PBT from 2018 to 2030 – split by applications
Table 24: Global demand for SAN from 2018 to 2030 – split by regions
Table 25: Global demand for SAN from 2018 to 2030 – split by applications
Table 26: Global demand for fluoropolymers from 2018 to 2030 – split by regions
Table 27: Global demand for fluoropolymers from 2018 to 2030 – split by applications
Table 28: Demand for engineering plastics in Western Europe from 2018 to 2030 – split by major countries
Table 29: Revenues generated with engineering plastics in Western Europe from 2018 to 2030 in million USD and million EUR
Table 30: Production of engineering plastics in Western Europe from 2018 to 2030 – split by major countries
Table 31: Demand for engineering plastics in Western Europe from 2018 to 2030 – split by applications
Table 32: Demand for engineering plastics in Western Europe from 2018 to 2030 – split by products
Table 33: Demand for ABS in Western Europe from 2009 to 2025 – split by applications
Table 34: Demand for PC in Western Europe from 2009 to 2025 – split by applications
Table 35: Demand for PA in Western Europe from 2009 to 2025 – split by applications
Table 36: Demand for PMMA in Western Europe from 2009 to 2025 – split by applications
Table 37: Demand for POM in Western Europe from 2009 to 2025 – split by applications
Table 38: Demand for PBT in Western Europe from 2009 to 2025 – split by applications
Table 39: Demand for SAN in Western Europe from 2009 to 2025 – split by applications
Table 40: Demand for fluoropolymers in Western Europe from 2009 to 2025 – split by applications
Table 41: Demand for engineering plastics in Eastern Europe from 2018 to 2030 – split by major countries
Table 42: Revenues generated with engineering plastics in Eastern Europe from 2018 to 2030 in million USD and million EUR
Table 43: Production of engineering plastics in Eastern Europe from 2018 to 2030 – split by major countries
Table 44: Demand for engineering plastics in Eastern Europe from 2018 to 2030 – split by applications
Table 45: Demand for engineering plastics in Eastern Europe from 2018 to 2030 – split by products
Table 46: Demand for ABS in Eastern Europe from 2018 to 2030 – split by applications
Table 47: Demand for PC in Eastern Europe from 2018 to 2030 – split by applications
Table 48: Demand for PA in Eastern Europe from 2018 to 2030 – split by applications
Table 49: Demand for PMMA in Eastern Europe from 2018 to 2030 – split by applications
Table 50: Demand for POM in Eastern Europe from 2018 to 2030 – split by applications
Table 51: Demand for PBT in Eastern Europe from 2018 to 2030 – split by applications
Table 52: Demand for SAN in Eastern Europe from 2018 to 2030 – split by applications
Table 53: Demand for fluoropolymers in Eastern Europe from 2018 to 2030 – split by applications
Table 54: Demand for engineering plastics in North America from 2018 to 2030 – split by major countries
Table 55: Revenues generated with engineering plastics in North America from 2018 to 2030 in million USD and million EUR
Table 56: Production of engineering plastics in North America from 2018 to 2030 – split by major countries
Table 57: Demand for engineering plastics in North America from 2018 to 2030 – split by applications
Table 58: Demand for engineering plastics in North America from 2018 to 2030 – split by products
Table 59: Demand for ABS in North America from 2018 to 2030 – split by applications
Table 60: Demand for PC in North America from 2018 to 2030 – split by applications
Table 61: Demand for PA in North America from 2018 to 2030 – split by applications
Table 62: Demand for PMMA in North America from 2018 to 2030 – split by applications
Table 63: Demand for POM in North America from 2018 to 2030 – split by applications
Table 64: Demand for PBT in North America from 2018 to 2030 – split by applications
Table 65: Demand for SAN in North America from 2018 to 2030 – split by applications
Table 66: Demand for fluoropolymers in North America from 2018 to 2030 – split by applications
Table 67: Demand for engineering plastics in South America from 2018 to 2030 – split by major countries
Table 68: Revenues generated with engineering plastics in South America from 2018 to 2030 in million USD and million EUR
Table 69: Production of engineering plastics in South America from 2018 to 2030 – split by major countries
Table 70: Demand for engineering plastics in South America from 2018 to 2030 – split by applications
Table 71: Demand for engineering plastics in South America from 2018 to 2030 – split by products
Table 72: Demand for ABS in South America from 2018 to 2030 – split by applications
Table 73: Demand for PC in South America from 2018 to 2030 – split by applications
Table 74: Demand for PA in South America from 2018 to 2030 – split by applications
Table 75: Demand for PMMA in South America from 2018 to 2030 – split by applications
Table 76: Demand for POM in South America from 2018 to 2030 – split by applications
Table 77: Demand for PBT in South America from 2018 to 2030 – split by applications
Table 78: Demand for SAN in South America from 2018 to 2030 – split by applications
Table 79: Demand for fluoropolymers in South America from 2018 to 2030 – split by applications
Table 80: Demand for engineering plastics in Asia-Pacific from 2018 to 2030 – split by major countries
Table 81: Revenues generated with engineering plastics in Asia-Pacific from 2018 to 2030 in million USD and million EUR
Table 82: Production of engineering plastics in Asia-Pacific from 2018 to 2030 – split by major countries
Table 83: Demand for engineering plastics in Asia-Pacific from 2018 to 2030 – split by applications
Table 84: Demand for engineering plastics in Asia-Pacific from 2018 to 2030 – split by products
Table 85: Demand for ABS in Asia-Pacific from 2018 to 2030 – split by applications
Table 86: Demand for PC in Asia-Pacific from 2018 to 2030 – split by applications
Table 87: Demand for PA in Asia-Pacific from 2018 to 2030 – split by applications
Table 88: Demand for PMMA in Asia-Pacific from 2018 to 2030 – split by applications
Table 89: Demand for POM in Asia-Pacific from 2018 to 2030 – split by applications
Table 90: Demand for PBT in Asia-Pacific from 2018 to 2030 – split by applications
Table 91: Demand for SAN in Asia-Pacific from 2018 to 2030 – split by applications
Table 92: Demand for fluoropolymers in Asia-Pacific from 2018 to 2030 – split by applications
Table 93: Revenues generated with engineering plastics in the Middle East and Africa from 2018 to 2030 in million USD and million EUR
Table 94: Demand for engineering plastics in the Middle East and Africa from 2018 to 2030 – split by applications
Table 95: Demand for engineering plastics in the Middle East and Africa from 2018 to 2030 – split by products
Table 96: Demand for ABS in the Middle East and Africa from 2018 to 2030 – split by applications
Table 97: Demand for PC in the Middle East and Africa from 2018 to 2030 – split by applications
Table 98: Demand for PA in the Middle East and Africa from 2018 to 2030 – split by applications
Table 99: Demand for PMMA in the Middle East and Africa from 2018 to 2030 – split by applications
Table 100: Demand for POM in the Middle East and Africa from 2018 to 2030 – split by applications
Table 101: Demand for PBT in the Middle East and Africa from 2018 to 2030 – split by applications
Table 102: Demand for SAN in the Middle East and Africa from 2018 to 2030 – split by applications
Table 103: Demand for fluoropolymers in the Middle East and Africa from 2018 to 2030 – split by applications
Table 104: Revenues generated with engineering plastics in Austria from 2018 to 2030 in million USD and million EUR
Table 105: Demand for engineering plastics in Austria from 2018 to 2030 – split by products
Table 106: Revenues generated with engineering plastics in Belgium from 2018 to 2030 in million USD and million EUR
Table 107: Demand for engineering plastics in Belgium from 2018 to 2030 – split by applications
Table 108: Demand for engineering plastics in Belgium from 2018 to 2030 – split by products
Table 109: Production, import, and export of and demand for engineering plastics in Belgium from 2018 to 2030
Table 110: Revenues generated with engineering plastics in France from 2018 to 2030 in million USD and million EUR
Table 111: Demand for engineering plastics in France from 2018 to 2030 – split by applications
Table 112: Demand for engineering plastics in France from 2018 to 2030 – split by products
Table 113: Production, import, and export of and demand for engineering plastics in France from 2018 to 2030
Table 114: Revenues generated with engineering plastics in Germany from 2018 to 2030 in million USD and million EUR
Table 115: Demand for engineering plastics in Germany from 2018 to 2030 – split by applications
Table 116: Demand for engineering plastics in Germany from 2018 to 2030 – split by products
Table 117: Production, import, and export of and demand for engineering plastics in Germany from 2018 to 2030
Table 118: Revenues generated with engineering plastics in Italy from 2018 to 2030 in million USD and million EUR
Table 119: Demand for engineering plastics in Italy from 2018 to 2030 – split by applications
Table 120: Demand for engineering plastics in Italy from 2018 to 2030 – split by products
Table 121: Production, import, and export of and demand for engineering plastics in Italy from 2018 to 2030
Table 122: Revenues generated with engineering plastics in Spain from 2018 to 2030 in million USD and million EUR
Table 123: Demand for engineering plastics in Spain from 2018 to 2030 – split by applications
Table 124: Demand for engineering plastics in Spain from 2018 to 2030 – split by products
Table 125: Production, import, and export of and demand for engineering plastics in Spain from 2018 to 2030
Table 126: Revenues generated with engineering plastics in the Netherlands from 2018 to 2030 in million USD and million EUR
Table 127: Demand for engineering plastics in the Netherlands from 2018 to 2030 – split by applications
Table 128: Demand for engineering plastics in the Netherlands from 2018 to 2030 - split by products
Table 129: Production, import, and export of and demand for engineering plastics in the Netherlands from 2018 to 2030
Table 130: Revenues generated with engineering plastics in the United Kingdom from 2018 to 2030 in million USD and million EUR
Table 131: Demand for engineering plastics in the United Kingdom from 2018 to 2030 – split by applications
Table 132: Demand for engineering plastics in the United Kingdom from 2018 to 2030 – split by products
Table 133: Revenues generated with engineering plastics in Other Western Europe from 2018 to 2030 in million USD and million EUR
Table 134: Demand for engineering plastics in the remaining countries of Western Europe from 2018 to 2030 – split by products
Table 135: Production, import, and export of and demand for engineering plastics in Other Western Europe from 2018 to 2030
Table 136: Revenues generated with engineering plastics in Czechia from 2018 to 2030 in million USD and million EUR
Table 137: Demand for engineering plastics in Czechia from 2018 to 2030 – split by products
Table 138: Revenues generated with engineering plastics in Poland from 2018 to 2030 in million USD and million EUR
Table 139: Demand for engineering plastics in Poland from 2018 to 2030 – split by applications
Table 140: Demand for engineering plastics in Poland from 2018 to 2030 – split by products
Table 141: Production, import, and export of and demand for engineering plastics in Poland from 2018 to 2030
Table 142: Revenues generated with engineering plastics in Russia from 2018 to 2030 in million USD and million EUR
Table 143: Demand for engineering plastics in Russia from 2018 to 2030 – split by applications
Table 144: Demand for engineering plastics in Russia from 2018 to 2030 – split by products
Table 145: Production, import, and export of and demand for engineering plastics in Russia from 2018 to 2030
Table 146: Revenues generated with engineering plastics in Turkey from 2018 to 2030 in million USD and million EUR
Table 147: Demand for engineering plastics in Turkey from 2018 to 2030 – split by applications
Table 148: Demand for engineering plastics in Turkey from 2018 to 2030 – split by products
Table 149: Revenues generated with engineering plastics in Other Eastern Europe from 2018 to 2030 in billion USD and billion EUR
Table 150: Demand for engineering plastics in the remaining countries of Eastern Europe from 2018 to 2030 – split by products
Table 151: Production, import, and export of and demand for engineering plastics in Other Eastern Europe from 2018 to 2030
Table 152: Revenues generated with engineering plastics in Canada from 2018 to 2030 in million USD and million EUR
Table 153: Demand for engineering plastics in Canada from 2018 to 2030 – split by applications
Table 154: Demand for engineering plastics in Canada from 2018 to 2030 – split by products
Table 155: Production, import, and export of and demand for engineering plastics in Canada from 2018 to 2030
Table 156: Revenues generated with engineering plastics in Mexico from 2018 to 2030 in million USD and million EUR
Table 157: Demand for engineering plastics in Mexico from 2018 to 2030 – split by applications
Table 158: Demand for engineering plastics in Mexico from 2018 to 2030 – split by products
Table 159: Production, import, and export of and demand for engineering plastics in Mexico from 2018 to 2030
Table 160: Revenues generated with engineering plastics in the USA from 2018 to 2030 in million USD and million EUR
Table 161: Demand for engineering plastics in the USA from 2018 to 2030 – split by applications
Table 162: Demand for engineering plastics in the USA from 2018 to 2030 – split by products
Table 163: Production, import, and export of and demand for engineering plastics in the USA from 2018 to 2030
Table 164: Revenues generated with engineering plastics in Brazil from 2018 to 2030 in million USD and million EUR
Table 165: Demand for engineering plastics in Brazil from 2018 to 2030 – split by applications
Table 166: Demand for engineering plastics in Brazil from 2018 to 2030 – split by products
Table 167: Production, import, and export of and demand for engineering plastics in Brazil from 2018 to 2030
Table 168: Revenues generated with engineering plastics in Other South America from 2018 to 2030 in million USD and million EUR
Table 169: Demand for engineering plastics in Other South America from 2018 to 2030 – split by applications
Table 170: Demand for engineering plastics in the remaining countries of South America from 2018 to 2030 – split by products
Table 171: Revenues generated with engineering plastics in China from 2018 to 2030 in million USD and million EUR
Table 172: Demand for engineering plastics in China from 2018 to 2030 – split by applications
Table 173: Demand for engineering plastics in China from 2018 to 2030 – split by products
Table 174: Production, import, and export of and demand for engineering plastics in China from 2018 to 2030
Table 175: Revenues generated with engineering plastics in India from 2018 to 2030 in million USD and million EUR
Table 176: Demand for engineering plastics in India from 2018 to 2030 – split by applications
Table 177: Demand for engineering plastics in India from 2018 to 2030 – split by products
Table 178: Production, import, and export of and demand for engineering plastics in India from 2018 to 2030
Table 179: Revenues generated with engineering plastics in Indonesia from 2018 to 2030 in million USD and million EUR
Table 180: Demand for engineering plastics in Indonesia from 2018 to 2030 – split by products
Table 181: Production, import, and export of and demand for engineering plastics in Indonesia from 2018 to 2030
Table 182: Revenues generated with engineering plastics in Japan from 2018 to 2030 in million USD and million EUR
Table 183: Demand for engineering plastics in Japan from 2018 to 2030 – split by applications
Table 184: Demand for engineering plastics in Japan from 2018 to 2030 – split by products
Table 185: Production, import, and export of and demand for engineering plastics in Japan from 2018 to 2030
Table 186: Revenues generated with engineering plastics in Malaysia from 2018 to 2030 in million USD and million EUR
Table 187: Demand for engineering plastics in Malaysia from 2018 to 2030 – split by products
Table 188: Production, import, and export of and demand for engineering plastics in Malaysia from 2018 to 2030
Table 189: Revenues generated with engineering plastics in South Korea from 2018 to 2030 in million USD and million EUR
Table 190: Demand for engineering plastics in South Korea from 2018 to 2030 – split by applications
Table 191: Demand for engineering plastics in South Korea from 2018 to 2030 – split by products
Table 192: Production, import, and export of and demand for engineering plastics in South Korea from 2018 to 2030
Table 193: Revenues generated with engineering plastics in Taiwan from 2018 to 2030 in million USD and million EUR
Table 194: Demand for engineering plastics in Taiwan from 2018 to 2030 – split by applications
Table 195: Demand for engineering plastics in Taiwan from 2018 to 2030 – split by products
Table 196: Production, import, and export of and demand for engineering plastics in Taiwan from 2018 to 2030
Table 197: Revenues generated with engineering plastics in Thailand from 2018 to 2030 in million USD and million EUR
Table 198: Demand for engineering plastics in Thailand from 2018 to 2030 – split by products
Table 199: Production, import, and export of and demand for engineering plastics in Thailand from 2018 to 2030
Table 200: Revenues generated with engineering plastics in Vietnam from 2018 to 2030 in million USD and million EUR
Table 201: Demand for engineering plastics in Vietnam from 2018 to 2030 – split by products
Table 202: Production, import, and export of and demand for engineering plastics in Vietnam from 2018 to 2030
Table 203: Revenues generated with engineering plastics in Other Asia-Pacific from 2018 to 2030 in million USD and million EUR
Table 204: Demand for engineering plastics in the remaining countries of Asia-Pacific from 2018 to 2030 – split by products
Table 205: Production, import, and export of and demand for engineering plastics in Other Asia-Pacific from 2018 to 2030